YOUDE CLAPTON SERIE

28AWG×2 (Parallel) + 32AWG: 32AWG kanthal wrapped around two strands of 28AWG kanthal (parallel).

  THE PACKAGE CONTAINS:

• 5m YOUDE CLAPTON WIRE 28gaX2+32ga 

Needle Bottle 20ml

• 20ml
• empty plastic bottle with needle dropper
• used for storing or mixing e-juice.

Replacement O-rings for the Kanger Subtank MINI / NANO

The seals from a Kanger tank tend to fall out or rip over time. We strongly suggest having a pack of these on hand.

The pack contains:

•  1 set of 3 SUBTANK MINI o-rings (top, bottom and airflow) (WHITE / NOIR / RED / BLUE / PURPLE)

OR

• 1 set of 2 SUBTANK NANO o-rings (WHITE / NOIR / RED / BLUE / PURPLE)

Kanger Subox Mini Silicone Case 

The silicone case for the Kanger SUBOX Mini fit snugly around your device, protecting it from nicks, scratches, and drops.

Colors : White

MIXING SYRINGE 5ML

Perfect for home mixing. Accurate and easy to use.

DETAILS:

• Capacity: 5ml

• Blunt needle

Efest Silicone Battery Case

The Efest silicon battery case can hold one 18650 battery.

Case does not include any batteries.

Youde - Ceramic Tweezers

The tweezers is one of the most fundamental tools needed for "spinning the coil" (preparing the RBA evaporator for operation).Thanks to the ceramic coating (which does not conduct electricity) the entire process is even simpler - the winding can be readjusted while being heated, without having to worry about shorting it.

The tweezers is made from stainless steel and ceramic coating.

Youde - Kanthal A1 resistance wire

The wire is indispensable for making coils for RBA atomizers. 

Youde (UD) is one of the top, most acclaimed brands manufacturing accessories for making coils.

THE PACKAGE CONTAINS:

• Youde - Kanthal A1 - 10m 

TECHNICAL SPECIFICATIONS:

• Length: 10 m

• Diameter: 0.3mm (28AWG), 0.4 mm (AWG 26),  0.5mm (AWG 24)

Please Note: This product is intended for use by customers who understand the risks and dangers of working with low resistance coils, wires and proper battery safety. If you are at all unsure, please do not order.

Thunderhead - Prewrapped Kanthal coils

THE PACKAGE CONTAINS:

• 10 x Pre-built coils in sturdy plastic tube for secure and easy storage.

TECHNICAL SPECIFICATIONS:

• 10 x Pre made Kanthal coils

• Resistance: 1ohms

• Wire Diameter: 0.4mm

Please Note: This product is intended for use by customers who understand the risks and dangers of working with low resistance coils, wires and proper battery safety. If you are at all unsure, please do not order.

Thunderhead - Prewrapped Kanthal SUB-OHM coils

THE PACKAGE CONTAINS:

• 10 x Pre-built coils in sturdy plastic tube for secure and easy storage.

TECHNICAL SPECIFICATIONS:

• 10 x Pre made Kanthal coils

RESISTANCE AVAILABLE:

• 0.8 ohms/Wire diameter 0.4mm

• 0.6ohm/Wire diameter 0.4mm

Please Note: This product is intended for use by customers who understand the risks and dangers of working with low resistance coils, wires and proper battery safety. If you are at all unsure, please do not order.

Monkey Os - Monkey O Kit

The Monkey O's kit will assist you in blowing perfect and consistent smoke and vapor rings. The included Monkey Juice solution allows you to create huge, strong smoke/vapor filled bubbles.

Monkey Juice is completely non-toxic and specifically formulated to make the biggest, strongest smoke bubbles out there. Each jar contains 2 ounces of non-toxic liquid with a sweet, lemony smell. A specially formulated sponge perfectly sized to fit your Monkey Os smoke ring blower is included, as well. 

THE PACKAGE CONTAINS:

• 1x Vibrant Monkey (Assorted colors)

• 1x Container of Monkey Juice (2oz)

How To Use Monkey Juice:

• Shake well

• Pour Monkey Juice onto sponge pad

• Dab Monkey O on sponge and gently blow a bubble

• Give Monkey O a flick to release bubble

Vape Band - Decorative Silicone Ring

Providing skid resistance, it can decorate your batteries and atomizers. Get it to give your E-cigarette a new look!

THE PACKAGE CONTAINS:

• 1x Decorative Silicone Ring

DETAILS:

• Diameter: 23mm

Aspire - Nautilus Mini Steel Hollowing Design Replacement Tube

Aspire Nautilus Steel Hollowing Design Replacement Tube is only for Aspire Nautilus Mini BVC -2ml .

THE PACKAGE CONTAINS:

• 1 x Aspire Mini Nautilus Steel Hollowing Design Replacement Tube

HOW TO REPLACE THE TUBE:

• Screw off the airflow control valve.

• Change the Pyrex Steel tube.

• Carefully screw on the connector. Filled with e-juice, and connect it with the battery.

Fits to:

Kanger E-Smart USB charger

• Exclusively for charging Kanger E-Smart batteries
• Colour: White

Eleaf iStick 510-eGo adapter

eGo adapter is the special adapter for Eleaf iStick series batteries, 10w, 20w, 30w and 50w istick.

Get it as a spare part.

Micro USB Cable

• 1.5m USB cable for e-cigarette
• It can not only charge the battery, but also transfer data.

Fits: Eleaf iStick batteries, Kangertech IPOW 2

The stylish Innokin iTasteVV case is made of genuine leather and is designed to fit the iTaste VV 3.0, and eGo/Evod style e-cigarettes.

Details:

• 100% Leather 
• Length: 18cm 
• Width: 4cm 
• Depth: 2 cm

The sleeve is one of elements making up the SUBTANK / TOPTANK / Volish Mod Tank Mini clearomizer. It is made from transparent Pyrex glass, which allows to control the amount of liquid left in the vaporator.

 THE PACKAGE CONTAINS:

• 1x Replacement pyrex tube for SUBTANK MINI 

OR

• 1x Replacement pyrex tube for SUBTANK NANO / TOPTANK NANO/ SUBVOD/ VOLISH MOD TANK MINI 

OR

• 1x Replacement pyrex tube for TOPTANK MINI 

 Leather Case with Lanyard

The leather case with a leash is great for conveniently carrying your Volish Control Nano Ultra e-cigarette. 

This product comes with

• 1 x Leather case with lanyard

 Fits Volish Control Nano Ultra battery and Eleaf iStick Mini 10W battery