Smoktech - TFV8 BABY replacement pyrex glass

THE PACKAGE CONTAINS:

• 1x Replacement pyrex glass for TFV 8 BABY tank

Aspire PockeX replacement pyrex

Aspire PockeX  glass replacement tube is the replacement tube for Aspire PockeX kit.

THE PACKAGE CONTAINS:

• 1x Aspire PockeX  pyrex glass replacement tube 

IT FITS:

Aspire - Nautilus X Extention Kit

Aspire - Nautilus 2

Aspire bringing you the new, curvy, Nautilus 2. The latest mouth to lung 2ml tank in the Nautilus series. Nautilus 2 employs a preinstalled 0.7Ω BVC coil, coupled with the bottom air flow adjuster, helping you to fine tune your vaping needs. Shorter chimney minimizes airflow travel and provides a better flavor experience, bringing the best out of your premium e-juice. Interchangeable coils with other Nautilus tanks, further individualizes your vaping experience.
Nautilus 2 tank comes in two finishes, Stainless steel and Aluminium.

THE KIT CONTAINS:

• 1 x Nautilus 2 Tank (0.7 ohm BVC coil pre-installed)
• 1 x replacement BVC coil (1.8 ohm)
• 1 x extra glass tube
• 1 x extra drip tip
• 8 x O-rings
• 1 x user manual

FEATURES:

• Top-fill
• Precise adjustable airflow 
• Pyrex glass tube
• BVC technology
• Improved flavor production
• Elegant modern body shape
• Capacity: 2 ml

RECOMMENDED ACCESSORIES:

Vaporesso - Ceramic EUC coil

THE PACKAGE CONTAINS:

• 1x Ceramic EUC coil 

Aspire - K3 BVC Tank

Joyetech - Cubis Pro Mini

CUBIS Pro Mini, adopts innovative and leak resistant cup design, whose coil replacement and juice fill can be achieved by removing this top section from the cup. Airflow controls is also contained within the removable top tank assembly, meaning the possibility for leakage or coil flooding is greatly reduced. With the CUBIS Pro Mini atomizer, you'll gain a perfect flavor and more precise vaping experience ever.

THE PACKAGE CONTAINS:

• 1 x Cubis Pro Mini Atomizer
• 1 x BF SS16-0.5ohm DL atomizer head
• 1 x LVC Clapton 1.5ohm MTL atomizer head
• 1 x Manual
• 1 x Warning Card

FEATURES:

• Top Filling And Top Airflow Control
• Detachable and Washable Structure
• Multiple Atomizer Heads Can Be Applied

SPECIFICATIONS:

• Size: 22mm x 47mm
• Capacity: 2.0ml
• Material: SS + Pyrex glass tube
• Thread: 510 Thread 
• Applicable Heads: 

DRIP TIP TEFLON XXL

Stand 510 ALU

Full Kit Eleaf iStickTC40W Battery

iStick TC40W adopts newly introduced technical element of temperature control. It will bring out a unique vaping experience without any dry hit by adjusting temperature setting. Despite the small size, it can reach 40W with large 2600mAh power capacity. Moreover, all stainless steel threads and elastic spring connector endow it with strong wear resistance. With temperature control function, less power and e-liquid consumption will also be a plus.

THE PACKAGE CONTAINS:

• 1 x Eleaf iStick 40W Box
• 1 x eGo Threading Connector
• 1 x USB Charging Cable
• 1 x User Manual

• Size: 36.2mm*22.3mm*77.3mm
• Capacity: 2600mAh
• Thread type: 510 thread
• Rated output wattage: 1-40W
• Rated resistance range: 

0.05-1ohm (TC mode）
0.15-3.5ohm (VW mode)

• Temperature range: 

100－315℃/200－600℉ (TC mode)

FEATURES:

• Temperature control function: By adjusting temperature in TC mode(Nickel 200), you can enjoy different vaping experience at different temperature settings.
• Less power and e-liquid consumption: With temperature control function, it will consume much less battery power and e-liquid in TC mode(Nickel 200) than in VW mode.
• Clear OLED display: In typical VW mode, the OLED screen displays battery power, resistance, voltage and wattage clearly. You can see clearly battery power, resistance, wattage and temperature in innovative TC mode(Nickel 200).
• Accurate reading of resistance: The reading of resistance becomes more accurate with the number down to the second decimal point.
• Large output and power capacity: Despite the small size, it can reach 40W output with 2600mAh power capacity.
• Stainless steel threads and spring connector: It retains stainless steel threads for strong wear resistance and elastic spring connector for high adaptability.

Note:

• This kit does not include any clearomizers or e-liquid. Theses are sold separately.

Smoktech - RBA TFV8 BABY Base

This RBA coil is specially designed for TFV8 Baby. With it, you can build your own coils.

THE PACKAGE CONTAINS:

• 1 x SMOK V8 Baby RBA Coil

• 1 x Replacement Glass tube for TFV8 Baby tank

This product is for very experienced users and requires technical knowledge in order to properly use it.

HOW TO BUILD THE RBA

1. Before starting make sure your hands are clean.

2. Taking RBA deck apart.

3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.

4. Cutting the ends of wire off.

5. Cutting a strip of cotton and make sure it’s not too much and not too less.

6. Inserting the cotton, and placing it in the middle.

7. Cutting the cotton at an angle and make sure it’s not too short and not too long.

8. Wet the coil with your e-liquid and adjust the cotton.

Warning:

Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

Smoktech - TFV8 replacement pyrex glass

THE PACKAGE CONTAINS:

• 1x Replacement pyrex glass for TFV 8 tank

Fits to:

Graduated Bottle

The graduated bottle comes in 3 sizes: 30ml , 60ml and 120ml.

Aspire - Cleito 3.5ml glass replacement

Aspire Cleito  glass replacement tube - 3.5ml, is the replacement tube for Aspire Cleito tank. 

THE PACKAGE CONTAINS:

• 1x Aspire Cleito  pyrex glass replacement tube - 3.5ml

Joyetech - Drip Tip Spiral AIO

Made of environmental plastic, it is of spiral structure, which is more beneficial for mouth inhale and is more secure. The 510 connection make it compatible with a whole host of e-cig tanks, RTA’s and RDA’s.

THE PACKAGE CONTAINS:

• 1 x eGo AIO Drip Tip

Efest - H2 Battery Case

Protect your batteries with this hard plastic case. Capable of holding up to two 18650 batteries.

THE PACKAGE CONTAINS:

• 1x Efest - H2 Battery Case

BATTERIES NOT INCLUDED

Unicorn bottle 

• Great for DIY e-liquid, or for tanks that require a pointed tip to fill

• Convenient shape and size

• 10ml, 30ml

Battery SAMSUNG INR 25R 35A 18650 2500MAH

SAMSUNG INR 18650-25R batteries 2500 mAh for your mods. Great discharge capacity up to 35 A in burst mode.

FEATURES:

• Voltage: 3.7 V

• Maximum voltage: 4.2 V

• Minimum voltage: 2.5 V

• Chemistry: Li NMC

• Maximum discharge current: 35 A in burst mode

• Continuous discharge capacity: 20 A

• Flat top

• Capacity: 2500 mAh

• Length: 65 mm

• Diameter: 18 mm

• Weight: 44 g

PLEASE EDUCATE YOURSELF ABOUT  BATTERIES BEFORE USING THEM

• NEVER leave batteries unattended when charging

• Do not charge over 4.2V

• Do not change polarity

• Do not heat the battery, or store under the influence of high temperatures

• Do never shortcut

• Make sure they do not come in contact with water

• After long storage times need the cell probably make a few charge cycles to increase capacity again

• Do not discharge below 2.5V

• Do not mix fresh batteries with used batteries

• Do not mix batteries with metal stuff together

• Do not insert batteries with the (+) and (-) reversed

• Do not use  batteries with defective E-Cig mod

Geek Vape - DIY Tools Accessory Mini Kit

Geek Vape DIY Tools Accessory Mini Kit , comes with 5 kinds of DIY tools, including cross screwdriver, straight screwdriver, hexagonal screwdriver, diagonal piers and niper pliers for coils.

THE PACKAGE CONTAINS:

• 1 x cross screwdriver

• 1 x straight screwdriver

• 1 x hexagonal screwdriver

• 1 x diagonal piers for coils

• 1 x niper pliers for coils