Aspire bringing you the new, curvy, Nautilus 2. The latest mouth to lung 2ml tank in the Nautilus series. Nautilus 2 employs a preinstalled 0.7Ω BVC coil, coupled with the bottom air flow adjuster, helping you to fine tune your vaping needs. Shorter chimney minimizes airflow travel and provides a better flavor experience, bringing the best out of your premium e-juice. Interchangeable coils with other Nautilus tanks, further individualizes your vaping experience. Nautilus 2 tank comes in two finishes, Stainless steel and Aluminium.
THE KIT CONTAINS:
1 x Nautilus 2 Tank (0.7 ohm BVC coil pre-installed)
CUBIS Pro Mini, adopts innovative and leak resistant cup design, whose coil replacement and juice fill can be achieved by removing this top section from the cup. Airflow controls is also contained within the removable top tank assembly, meaning the possibility for leakage or coil flooding is greatly reduced. With the CUBIS Pro Mini atomizer, you'll gain a perfect flavor and more precise vaping experience ever.
THE PACKAGE CONTAINS:
1 x Cubis Pro Mini Atomizer
1 x BF SS16-0.5ohm DL atomizer head
1 x LVC Clapton 1.5ohm MTL atomizer head
1 x Manual
1 x Warning Card
Top Filling And Top Airflow Control
Detachable and Washable Structure
Multiple Atomizer Heads Can Be Applied
Size: 22mm x 47mm
Material: SS + Pyrex glass tube
Thread: 510 Thread
- BF SS316 Series heads - BF Clapton 1.5ohm head - BF Ni - BF RBA head - QCS Coil - LVC Clapton 1.5ohm head - NothCoil 0.25ohm DL head
iStick TC40W adopts newly introduced technical element of temperature control. It will bring out a unique vaping experience without any dry hit by adjusting temperature setting. Despite the small size, it can reach 40W with large 2600mAh power capacity. Moreover, all stainless steel threads and elastic spring connector endow it with strong wear resistance. With temperature control function, less power and e-liquid consumption will also be a plus.
THE PACKAGE CONTAINS:
1 x Eleaf iStick 40W Box
1 x eGo Threading Connector
1 x USB Charging Cable
1 x User Manual
Thread type: 510 thread
Rated output wattage: 1-40W
Rated resistance range:
0.05-1ohm (TC mode） 0.15-3.5ohm (VW mode)
100－315℃/200－600℉ (TC mode)
Temperature control function: By adjusting temperature in TC mode(Nickel 200), you can enjoy different vaping experience at different temperature settings.
Less power and e-liquid consumption: With temperature control function, it will consume much less battery power and e-liquid in TC mode(Nickel 200) than in VW mode.
Clear OLED display: In typical VW mode, the OLED screen displays battery power, resistance, voltage and wattage clearly. You can see clearly battery power, resistance, wattage and temperature in innovative TC mode(Nickel 200).
Accurate reading of resistance: The reading of resistance becomes more accurate with the number down to the second decimal point.
Large output and power capacity: Despite the small size, it can reach 40W output with 2600mAh power capacity.
Stainless steel threads and spring connector: It retains stainless steel threads for strong wear resistance and elastic spring connector for high adaptability.
This kit does not include any clearomizers or e-liquid. Theses are sold separately.
This RBA coil is specially designed for TFV8 Baby. With it, you can build your own coils.
THE PACKAGE CONTAINS:
1 x SMOK V8 Baby RBA Coil
1 x Replacement Glass tube for TFV8 Baby tank
This product is for very experienced users and requires technical knowledge in order to properly use it.
HOW TO BUILD THE RBA
Before starting make sure your hands are clean.
Taking RBA deck apart.
Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
Cutting the ends of wire off.
Cutting a strip of cotton and make sure it’s not too much and not too less.
Inserting the cotton, and placing it in the middle.
Cutting the cotton at an angle and make sure it’s not too short and not too long.
Wet the coil with your e-liquid and adjust the cotton.
Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
Made of environmental plastic, it is of spiral structure, which is more beneficial for mouth inhale and is more secure. The 510 connection make it compatible with a whole host of e-cig tanks, RTA’s and RDA’s.